SPS Show: Siemens puts a new face on interfaces

Integrated Automation Portal uses engineering software to allow rapid development and commissioning of automation systems.

11/23/2010


Siemens SPS show

Siemens put a new face on industrial automation interfaces at the SPS Show in Nuremburg, Germany.

The Siemens Totally Integrated Automation Portal uses engineering software to allow rapid development and commissioning of automation systems. Siemens officials at the packed press conference at Nuremburg Messe said the TIA Portal allows deployment of systems much quicker, which will lead to lower development costs. It also stands as the company’s new standard for all future software engineering packages for configuring, programming and commissioning automation and drives products in the Totally Integrated Automation portfolio from Siemens.

“We started with TIA in 1995 to define joint software tools, joint interfaces and to make sure we have data consistency across these interfaces,” said Anton Huber, CEO of Siemens Industry Automation. “A couple of years ago, we started to think of next step we needed to take to help customers deal with their workflow. What we did was to sit with customers and discuss their requirements to find ways to engineer a cost-effective way to optimize workflows.”

According to the Siemens press release, “the TIA Portal framework provides advanced shared services across all the configuration interfaces ensuring uniform navigation for the user and consistent system behavior. For example, all devices and networks in any automation system can now be configured within one shared device and network editor.”

“What is benefit to customer?” Huber said. “With workflow supported engineering, engineering effort goes down dramatically today, and with systems in the future, they can save 25% in hardware and software. Workflow-oriented engineering systems can realize up to 45% cost savings in engineering costs.”

At the same press conference Drive Technology CEO Klaus Helmrich talked about the influence Siemens has had on worldwide drives standards, and the potential of energy savings with industry-wide adoption of drive technology improvements.

“In Germany, industry consumes 47% of the total energy used, and 70% is in motors and drives,” Helmrich said. “In our installed base in Germany, that’s 38 billion kWh, and 24 million tons of CO2.”

“It is not enough to confront our customers that there are components that can help them. It is helping them understand the solution,” he said. “Working together with our customer, we can optimize their energy use. When talk about 35 million installed motors in Germany, this is a field on which we could focus. This does include a lot of savings potential on the operations side. This taps great savings potential for an organization.”

Helmrich pointed to savings of $240,000 at a Kraft Foods plant in Germany, a project that will deliver ROI in less than three years. “People are looking at energy efficiency and optimization. Leading companies are emphasizing this.  Clearly our customers are focusing much more on energy efficiency,” Helmrich said. “We are promoting the integration between drive technology and control technology level.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.