Stainless steel sensors for wash down: photoelectric, inductive

Rockwell Automation's 42CS photoelectric and 871TS inductive sensor families address the most demanding applications in the food and beverage industry. Highly durable, corrosion-resistant sensors designed for reliable, long-life performance in high-temperature, high-pressure wash downs.

10/20/2010


Two new families of sensors from Rockwell Automation address the most demanding applications in the food and beverage industry. These sensors withstand high-pressure and high-temperature wash downs, while offering excellent resistance to corrosion and damage caused by harsh cleansing agents.

The 42CS photoelectric and 871TS inductive sensor families feature stainless steel construction, extended temperature ratings and IP69K enclosure ratings. IP69K testing replicates the steam-cleaning process typically used in the food and beverage industry. This testing requires the sensors to withstand spray pressure up to 1,450 psi and temperatures up to 176 degrees F (80 degrees C).  

In addition, both sensor families have been subjected to and certified to pass chemical compatibility testing by two independent labs, both of which are worldwide leaders in the development of cleaning and sanitizing products. In testing, the sensors were subjected to some of the most commonly used caustic cleaning agents and disinfectants in the food and beverage industry

“Harsh manufacturing environments require sensors capable of withstanding the frequent jet-spray wash downs, high temperatures and corrosive cleansing agents commonly used in these processes,” said Paul Gieschen, market development director, Rockwell Automation. “These highly durable sensors are specifically engineered to address these demands, while providing users with excellent sensor adjustment flexibility and a wide range of sensing modes.”

The Photoswitch 42CS sensor family features a choice of a smooth or threaded 18mm 316L stainless steel housing with a hard plastic lens for enhanced reliability and long service life, as well as an operating temperature range of minus 25 to 85 degrees C. Smooth barrel models are designed to minimize the accumulation of undesired particles on the sensor’s body and to allow easier cleanup.

An innovative ferromagnetic teach feature minimizes the possibility of water ingress associated with the use of push button or potentiometer adjustment. This feature, offered on select sensing modes, allows users to easily adjust and optimize the sensing range to meet specific application demands.

The 42CS sensor family offers polarized retro-reflective, diffuse, transmitted beam, clear object detection and background suppression sensing modes. A background suppression sensor is specially designed to detect shiny objects that often go undetected by other such sensors if the object is approaching at a slight angle. A stainless steel bracket is offered for mounting of smooth-barrel sensors.

The 871TS inductive proximity sensors feature a stainless steel 316L barrel and an FDA-certified polyphenylene sulfide plastic face that protects against chemicals and other corrosive agents. Sensors are offered in 12mm and 18mm diameter threaded cylindrical enclosures with operating temperature range of minus 40 to 80 degrees C. For added application flexibility, standard and extended range units are available.

www.ab.com/sensors

Rockwell Automation

- Also see:

10 Principles of Sustainable, Cost-Effective Design: Building a Safer, More Efficient Machine;

Improving Manufacturing Performance through Intelligent Safety System Design; and

Safety Automation Forum – Protecting People, Productivity and Planet – November 2, 2010


- Edited by Amanda McLeman, Control Engineering, CFE Media, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.