Swedish nuclear power plant modernizes I&C infrastructure

Ringhals Unit 3 implements a new control system during 30-day shutdown, back on line for winter demand.

02/01/2011


Ringhals, the Swedish electric power utility, has upgraded the instrumentation and control (I&C) infrastructure for its Unit 3 in record time. Working with Alstom, the team has successfully completed the installation of a new control system in 30 days. The system has passed an exhaustive series of operational testing since it first synchronized to the grid in mid-October. This is the last important milestone of the integrated retrofit of the complete turbo group systems of Unit 3 which will boost generating efficiency. The commissioning of the new control system enabled the plant to deliver full power output in time for the increasing winter demand.

"I am very pleased with the good collaboration during the project execution” said Bertil Dihné, president, Ringhals AB. “Thanks to our joint efforts, all challenges within the project were met, and Ringhals 3 is now up and running in secure and stable commission.”

After a long period of engineering and mock-up tests, the actual installation work began in late August and was completed one month later, to meet the deadline for cold commissioning – a phase of preparation, installation, and testing, before turning the reactor steam on.

The next major step for Ringhals and Alstom is the completion of block 4 in 2011, which includes installation of the control system, erection of four new moisture separators, installation of two high-pressure turbines, and two low-pressure preheaters.

The Ringhals nuclear power plant is situated on the west coast of Sweden, 60 km south of Gothenburg, and at 3,690 MW, is the largest power plant in Scandinavia. The plant has four reactors - three pressurized water reactors and one boiling water reactor. In a normal year, Ringhals generates around 28 billion kWh – approximately 20% of Sweden’s total electrical energy consumption.

www.alstom.com

www.ringhals.se

Edited by Peter Welander, pwelander(at)cfemedia.com

Visit the Control Engineering Process Control Channel.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.