Testing Toyota

03/10/2010


I have been following some of the discussions related to Toyotas lately. (In the interests of full disclosure, my wife drives a 2008 Prius and my daughter drives a 2008 Matrix. My wife is out of town at the moment, so I drove the Prius to work this morning. I did give a quick inspection to the floor mat and all seemed fine. I’ve driven it enough to think the concept of “rapid acceleration” is not in its vocabulary. The Matrix has a manual transmission, and I believe my daughter is a skilled enough driver to push in the clutch if necessary.)

Yesterday there was an article in the Chicago Tribune suggesting that Toyota is launching a counter offensive trying to discredit the efforts of David Gilbert (Southern Illinois University) who testified to congress that there are circumstances under which Toyota’s electronic throttle control can put the car into runaway mode. In response, Toyota’s contention is that Gilbert had to go to great lengths to make the controller fail. Its engineers demonstrated that if you go that far, any car’s controller will also freak out. They proved the point by using the same techniques on controllers from seven other vehicles, including Ford, Chevrolet, and Honda. All flunked the test.

“This is very interesting and timely,” you say, “but what does it have to do with process industries?” A fair question. The situation makes me wonder how such devices are designed and tested. Might it not be interesting to subject such a throttle controller to the same rigorous testing as a field device or PLC that is intended for a safety system? What would happen if Toyota or any automotive manufacturer submitted such critical system components to TÜV or a similar lab in order to get a SIL rating? (If you aren’t familiar with SIL ratings and what they mean, read this article.) Should a car’s throttle assembly have to pass a SIL 3 rating? SIL 2?

Needless to say, a safety PLC that helps keep a refinery from blowing up needs such rigorous testing. Maybe a few other things do as well.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.