The software that wasn’t there

Do you need to be concerned about security issues with programs that you don’t use? Yes.

10/07/2011


Dear Control Engineering:

I found an interesting comment in an article about cyber security fixes for SCADA systems. The article says: “AzeoTech eliminated the vulnerable feature in the next version (Version 5.86). The company did not document the feature, so AzeoTech does not believe any of their customers were using it. Therefore, its removal should not adversely affect any DAQFactory users.” Do I need to be concerned about vulnerabilities in software that I don’t use?

Yes. You need to be concerned about any vulnerability in your system, even if it is in an application you don’t use. If it’s there, the vulnerability can probably be exploited.

That’s why cyber security experts recommend two important things:

• Know all the software that is on your systems, and
• Don’t have any software that you don’t need.

Somewhere you need to have a list that is constantly updated to reflect the most recent version of every program running on your networks. If you don’t have such a list, start compiling it. Once you have the list, make sure there is nothing there that isn’t necessary. If you find a program that you didn’t realize was there, was installed some time ago for a temporary purpose, or that nobody uses, get rid of it. Don’t just disable it, get rid of it. Otherwise, a cyber criminal may find a weak program and exploit a vulnerability, and when the attack hits, you will have no idea what happened. Programs that you don’t think about don’t get patched, so old weaknesses can be there until they’re discovered by a bad guy.

Update the list every time you get an update for any program, no matter how trivial. Your ability to resist an attack may depend on one little patch, and you need to know whether it’s been implemented or not.

Peter Welander, pwelander(at)cfemedia.com

 

See the Safety and Security Channel.

http://www.controleng.com/channels/plant-safety-and-security.html

See other Ask Control Engineering Blog postings

http://www.controleng.com/blogs/ask-control-engineering.html



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.