Thriving in today's engineering world

Engineers can follow these steps to develop a product.

01/24/2011


No matter which role I focused on—be it a drafter, designer, manufacturing engineer, or quality engineer—the goal was the same: Create a profit by inventing something new or build it economically. The best method to obtain a return on investment (ROI) is improving a product or designing a useful novel product. For the engineer to thrive, some details, processes, policies, and culture must be in place.

For example, new product development must be a cross-functional company goal, not an engineering task. There must be a defined communication process in place in which everyone participates, not just a mismatch of communication events that you hope will come together. Let the marketing and sales department speak for the customer, and let the engineers find solutions to customer needs. The company must provide suitable tools (software, hardware, and systems) that complement the core competencies within the organization. The last aspect is to tie all this together with a well thought-out product development plan—a detailed cross-functional communication plan that is simple, obtainable, and flexible for future opportunities.

When an opportunity presents itself, the company must be ready to act. If the company culture and philosophy is “create a product as a team” and not just to complete an engineering task, success is more likely. However, in my experience I have seen poor communication. I have seen lack of vision, and lack of good communication with only a tactical plan.

I have participated in engineering events where we were expected to serve as the sales, marketing, purchasing, manufacturing, and other teams. We did it all and then “threw it over the wall,” with no communication until the end of the project. The company was disconnected from the engineering product development process.

I also have worked in organizations in which the team could not make any decision without upper management's approval—micro management at its best (or worst). In this type of environment, nothing is accomplished on time or within budget. Clear and concise information must be presented, and decisions need to be made quickly.

Upper management establishes and communicates a vision and a strategic product plan for the company to thrive. The plan defines the market. The market segments make sense. The planning activity is not a one-hour task once a year; it is something that evolves over time. The plan is addressed annually and revised to reflect changes. Most importantly, the plan is communicated cross-functionally.

To effectively bring to market a new design is not just an engineering job—it must be a company goal. If it is not a company goal, then you will get just what the engineers want you to have. The better the plan is, the sooner profits come from sales. The company acts as a team united, not divided. Communication is the key here.

With the plan in place, and the culture ready to adapt, the next issue to resolve is teamwork. For a project team to be effective, team members must be empowered. What does “empowerment” really mean? The ability to make decisions within some guidelines. If team members are allowed to do that, they can truly feel empowered.

With an empowered team and a long-term vision, the next step in improving the product development task is to communicate the process that describes the goal of product development, the tasks needed to achieve it, and the roles of the participants in the development process. There are many processes to choose from, including Advanced Product Quality Planning (APQP) and Plan Do Study Act (PDSA). No matter what you use or establish, the objective is to control cost, manage the budget, and meet the customer needs. If your process covers those three items, and you consistently and frequently communicate project status, you will stay headed down the right track.

Thriving today depends on a lot on the industry and your products. There are many ways to achieve new product launch success, as we’ve discussed. Most importantly, product development is not just an engineering task. It is a company objective, requiring a laser-like focus, clear communications, and cross-functional teams empowered to create.


Janitz is manager of engineering at Muncie Power Products.


Implementation tips:

  1. Let the engineers engineer; therefore, manage the project from outside the engineering department.
    • Manage the project phase-by-phase
    • Be creative and flexible
  2. Improve and/or provide the necessary tools to achieve stated goals. Some examples are:
    • 3-D modeling
    • 3-D scanning
    • 3-D printing
  3. Institutionalize a long-term product plan showing dependencies and advanced engineering.
    • Create and communicate a high-level strategic team
    • Devise a customer picture
    • Construct and present a product plan

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.