Time to buy that electric car?

Have we reached the tipping point where an electric car will be cheaper? Watch this video.

04/29/2011

Flash is required!

Earlier this week, the Chicago Tribune ran a discussion about electric cars. If you recall the last time gas was this expensive a couple of years back, electric cars were on the drawing board, but that was about it. Now they’re available, at least sort of. (You may still have to wait to get an electric Rolls Royce.)

Murray Jones (left), discusses ABB electric vehicle charging technology with Peter Welander, CFE Media, Control Engineering.The article was considering whether that technology is now economically viable and practical, and the answer is: sort of. As for the economic side, here’s a point it made:

“At $5 a gallon, consumers who drive 12,000 miles a year could save on average $2,257 at Commonwealth Edison's off-peak electric rates by switching to a pure electric vehicle, according to an analysis released Wednesday by the Environmental Law and Policy Center.”

That’s great, but when you factor in the price of the car, the article goes on to suggest that it would take about 10 years to break even at current price levels.

The practicality question is another matter. If you buy a Volt, with its ability to recharge itself if necessary, you’re probably OK. If you buy a Leaf, you have to know where you’re going to charge it. You can do that at home, but let’s say you want to go on a road trip that will take you farther than a single charge. Where do you juice up?

ECOtality BLINKThe video clip helps answer that question. Among the things displayed at ABB’s Automation & Power World last week was an electric car charging station and a Nissan Leaf. ABB is keen on deploying this infrastructure, and hopes you will be interested in buying an electric car. In the video, Murray Jones explains what the company is doing, and where the first “electric highways” are being built. If car prices come down a little, this kind of thing could be here sooner than you think. 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.