Top Plant 2012: Masco Cabinetry

12/17/2012


“About five years ago, equipment availability was a major challenge for Sayre. As our Lean culture grew, knowledge of TPM and a focus on repairing equipment to OEM specifications—or better—have really been the key improvement drivers,” Hawthorne Courtesy: Louis Quattrini, MACH III PHOTOadded. “By involving operators in the events, and encouraging their involvement in the daily PMs, maintenance and operations have a constant focus on this metric with excellent results.”

When the Sayre plant started its Lean program, the teams explored Kaizen events and implemented Kaizen actions in the plant. “We started doing small events,” said Thurston. “We implemented a 5S program. Every month, we have a 5S audit to look for opportunities to improve a particular zone.”

The leadership team looked for ways to reduce the plant’s material costs. “Our biggest cost is wood,” Thurston said. “In 2011, we focused our value stream mapping on reducing wood waste. We looked at how much material is required to make a door and how much of the material was being thrown away. We looked at all the waste being thrown into the dumpsters and at that cost. When the teams investigated, they found that when the glued panels were produced, they were much larger than actually needed. The leftover wood from those panels was thrown in the dumpster. Now, we’re Courtesy: Louis Quattrini, MACH III PHOTOproducing those pieces very close to size. After gluing, there’s minimal material being wasted.”

According to Thurston, the plant has a very strong Lean program. “It really has affected everybody on the plant floor,” Thurston said. “Being Lean is a never-ending goal. It may start with a goal, but success with Lean comes from the people—education, training, wanting to grow—it is a circle.”

During the first three quarters of 2012, Masco Cabinetry saved about $2 million in costs associated with process improvements. And of that $2 million, $500,000 was directly attributed to eliminating waste.

Maintaining equipment, production uptime

One-piece workflow and just-in-time manufacturing requires maximum equipment availability, which can create challenges for operations and maintenance departments. “The closer you get to just-in-time, the more integral machine uptime is,” said White. “If a machine is down for more than four hours, it could shut the entire plant down. So, the maintenance group must generate preventive maintenance, predictive maintenance, and improve response times to ensure that downtime is minimized.”

Well maintained equipment enables operators to keep production moving during the solid panel and drawer front gluing processes. Courtesy: Louis Quattrini, MACH III PHOTOThe Sayre plant started implementing TPM in 2007. “That helped us considerably,” White said. “It reduced a lot of downtime. Every day, we had downtime on a piece of equipment that squares, clamps, and pins (fastens) the cabinet doors. We repeatedly had problems such as air leaks, manifold problems, out of square, pinning issues, and insufficient pin penetration.”

“With TPM, we got both operations and maintenance involved so we could work as a cohesive unit to keep the machines operational,” said White. “The operators were given tasks to perform each shift, at start-up and at shutdown. They were asked to handle some of the daily machine checks. Also, tool room personnel developed a program for pin gun maintenance to ensure they were working consistently every hour of every day. Between operations and maintenance, we developed a program for squaring checks to ensure that the machines were always square at the start and end of every shift.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.