Training and operator effectiveness

04/06/2010


Recently I received an email from Tom Williams who is now program manager, operator effectiveness for Honeywell Process Solutions. Tom used to be with the Specialty Materials division and was responsible for many of the process improvements made to the (formerly Allied Signal) plant in Geismar, LA. (Listen to an earlier podcast with Tom discussing that plant project.)

Tom had been reading the article Process Simulation Use Report, about ways plants are using simulation technology to help design control strategy and as an operator training tool. He says:

“I spent nine years as modeling and simulation leader for Honeywell’s Specialty Materials group before moving to Honeywell Process Solutions in November, 2008. I have generally kept up with these developments, but I continue to be amazed at what is possible using first-principles models in real time.

“The operator training system (OTS) that we deployed for our multi-products plant in Geismar as part of the Automation Showcase has gone double platinum. I can’t go anywhere in that plant without folks asking me when we are going to duplicate that on every unit. Of course the real reason for success is that the plant has a dedicated training department that worked with us to identify scenarios critical to plant performance. If the operators didn’t master those abnormal situations, the plant performance would not be nearly what it is today. This tool and the training department’s diligence are paying dividends.

“Of the many good things we did for the Showcase, the OTS may end up being the most influential. The APC projects drove the most immediate business results, but the OTS is changing how the operators think and act. It builds tremendous confidence, not only for the operator in his or her own abilities, but also in the approved procedures, thus driving procedure compliance. We may never know how many upsets we have avoided or how much improvement the OTS is driving, but it is substantial. I believe we will see continued growth in this area.”

Tom’s points are well made, particularly that the success was a result of a combination of technology and training. The modeling capabilities, no matter how good they are, won’t bring improvements without training. And training, when combined with the modeling technology, can be all that more effective. It all builds confidence on multiple fronts.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.