Transmitter sends power, data for energy harvesting and wireless power systems

Transmitter and receiver combo wirelessly charge and operate micro-power devices. Powercast’s RF energy-harvesting wireless power solution, the TX91501 broadcasts power and data over 40 feet to its companion Powerharvester receivers.

10/20/2010


Powercast Corporation, a leader in RF-based wireless power and energy harvesting technology, today announced availability of its TX91501 Powercaster Transmitter which uses the 915-MHz ISM band to transmit common radio waves for power and data in commercial, industrial and defense applications. As the power source for Powercast’s RF energy-harvesting wireless power solution, the TX91501 broadcasts power and data over 40 feet to its companion Powerharvester receivers. Embedded into micro-power devices such as wireless sensors, instrumentation and controls, the Powerharvester receivers convert the received RF energy into dc power for battery-free operation or to wirelessly trickle charge batteries. The receivers also output the data broadcast from the TX91501 as well as the received signal strength indication (RSSI).

Initial versions of the TX91501 transmitter will broadcast a unique ID for device authentication or location-tracking applications, while future versions will also transmit data such as timestamps for end-device synchronization and control.

Powercast’s TX91501 transmitter is approved by the FCC (Part 15) and Industry Canada. It can be used to broadcast RF energy for both power and data in numerous energy-harvesting applications such as environmental monitoring, building automation, energy management and industrial monitoring.

The RF signal uses Direct Sequence Spread Spectrum (DSSS) modulation for power and Amplitude Shift Keying (ASK) modulation for data. The TX91501 is available in versions with an output of 1 watt or 3 watts Effective Isotropic Radiated Power (EIRP).

The 6.75-inch H x 6.25-in. W x 1.63-in. D transmitter includes an integrated 8dBi directional antenna with a 60-degree beam pattern, and the unit mounts easily on either vertical or horizontal surfaces using one of two dc power jacks (bottom or back) and multiple mounting holes. The TX91501 operates immediately when powered on and requires no user configuration or programming. An internal shut-off mechanism automatically stops transmission when objects come close to the device, and an LED indicates transmission status.

Broadcasted RF energy creates a perpetual power source, unlike potentially unreliable solar, heat or vibration energy sources, to provide power-over-distance, one-to-many charging, and controllable wireless power (continuous, scheduled or on-demand). A wire- and battery-free power source enables zero-maintenance devices which deploy to inaccessible locations, and embeds within sealed devices for use in wet or harsh environments.

www.powercastco.com

Powercast Corporation

Also read from Control Engineering:

Wireless sensor networks: The next 10 years;

Wireless energy harvesting specification; and

Control Engineering Process Instrumentation and Industrial Networks new product areas.


- Edited by Amanda McLeman, Control Engineering, CFE Media, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.