Transport Ethernet, power over existing 2-wire installations

Product Exclusive: Using patented PCN IP-485 technology, PCN IP-Excite provides a robust and reliable way to transport Ethernet and Power over existing two-wire installations.

03/18/2013


PCN IP-Excite is shown in an artist rendering. Using patented PCN IP-485 technology, PCN IP-Excite provides a robust and reliable way to transport Ethernet and Power over existing two-wire installations. Courtesy: PCNBased on patented PCN IP-485 technology, PCN announces the scheduled availability of PCN IP-Excite, a robust and reliable way to transport Ethernet and Power over existing two-wire installations.

For many years sensors and control devices have used excitation voltage as means for powering and communicating with many devices. Most devices have been analog or serial-based technology not easily accessible to the Internet and in locations not easily Ethernet enabled. With PCN IP-Excite technology, all the benefits of powering the devices with proven excitation techniques can be realized while evolving installations to full TCP/IP-enabled Ethernet networks.

Whether ac or dc power excitation, PCN IP-Excite is ideal for any two-wire infrastructure where critical power and data are needed. The system is supported by a 19-in. rack mount router that connects directly to (16) PCN IP-Excite edge devices. For smaller installations, a single channel PCN IP-Excite Router supports up to (4) edge PCN IP-Excite modules. Each edge module has (3) RJ45 Ethernet ports.

Initial PCN IP-Excite products will support 300 V dc, 24 V ac, and 4-20 mA current loop networks.  Wattages are robust and in the example of 300 V dc application wattages are up to 150 W over distances up to 2,000 ft. Point-to-point applications can operate with bandwidths well over 20 Mbps.  Pilot testing data has shown upwards of 30-50 Mbps. PCN IP-Excite is not limited to point-to-point communications; it provides for full multi-drop applications over its specification. This allows power and communication with multiple IP/Ethernet devices over one two-wire cable (twisted/untwisted).

Availability is scheduled for fourth quarter (Q4) 2013 with early adopter programs starting in Q2 and Q3 2013. Request information at www.pcntechnology.com/contact.html.

PCN

www.pcntechnology.com 

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske(at)cfemedia.com.

See more products at www.controleng.com/products.  



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.