Turbine flowmeter for low volumes

Cox device uses low-friction ball bearings to perform in water, hydrocarbon, and cryogenic fluid applications.

02/15/2011


Cox device uses low-friction ball bearings to perform in water, hydrocarbon, and cryogenic fluid applications.Cox Flow Measurement, a division of Badger Meter, has introduced the LoFlo series turbine flowmeter family, which it characterizes as a robust axial turbine flowmeter with repeatability of ±0.25% of reading. Constructed of 316 stainless steel with -6 AN (MS) end-fittings, the meter employs a proprietary Si3N4 ceramic ball bearing system, which makes it well suited for the demands of water, hydrocarbon, and cryogenic fluid applications. The company says that turbine flowmeters using ceramic bearings benefit from reduced friction, corrosion resistance, increased durability, and a wide temperature range — contributing to longer life. Ceramic ball bearings have considerably less friction than journal or sleeve bearings, which extends the usable range of the flowmeter and improves measurement repeatability. Less friction translates into reduced wear, and thus less calibration drift.

The LoFlo Series meter uses a precision, lightweight 17-4 helical rotor and is calibrated on primary standard equipment. The helical blade profile transfers energy more efficiently which reduces bearing wear, pressure drop, and their associated cost.

When paired with a Cox EC80 Flow Computer, the flowmeter’s calibration data is linearized to within ±0.1% of reading, allowing for precision flow measurement over the device’s entire usable range. Repeatability is ±0.25%. Available in either integral- or remote-mount configurations, the EC80 flow computer provides temperature and pressure compensation with multiple output options.

The device is not position sensitive and can be mounted in any piping orientation. Designed to measure flows as low as 0.006 gpm (0.024 lpm), the meter is an ideal solution for a multitude of industries. Typical uses include fuel injection production systems, blending of costly chemical additives, onboard fuel consumption, refrigerants, dye injections, and more.

www.cox-instruments.com

Peter Welander, pwelander(at)cfemedia.com

Visit the Control Engineering Process Control Channel.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.