UK PV module price watch - Supply chain prices respond to feed-in tariff chaos

Although the UK saw record demand for PV modules up until the December 12th Feed-in tariff cut, on average December saw module prices in the UK decline in response to the heavy cuts that took place, albeit temporarily.

01/11/2012


Although the high court ruled that the changes to tariff were unlawful just over a week later and reversed the cuts; confusion over what the decision means for the industry, mixed with slow demand due to the Christmas break, means that prices have not yet had a chance to re-adjust to the news that the previous highly generous incentive levels appear to be on offer again - for the time being.

Average Supplier Prices Decline

Although December’s FiT cut forced some to pay inflated prices to secure modules via distributors before the FiT deadline, average prices for modules purchased direct from manufacturers declined by 6% over November’s level. The decline came as prices were adjusted to reflect the planned new incentive levels, and distributors and wholesalers cleared stock levels in anticipation of demand evaporating after the FiT cut.

Chart highlighting PV module market prices from the manufacturer. Courtesy: IMS Research

Chinese Tier-2 Pricing Declines to £0.66/W

Given the huge oversupply of PV modules that currently plagues the global PV industry; a spike in demand in the UK offered suppliers around the globe a much welcome opportunity to shift some of their bulging inventories and often at very attractive prices for their customers. This was particularly the case for Chinese Tier-2 manufacturers, who offered crystalline PV modules as low as £0.50/W during December, and average prices for these modules (purchased direct from manufacturers) fell to just £0.66/W during the month.

Despite declining by 15% in December, average crystalline module pricing direct from Japanese manufacturers remained significantly above their competition and over 30% higher than the market average. The long standing high-quality reputation of Japanese suppliers as well as the popularity of high efficiency products (e.g. Sanyo’s HIT module) in small roof-top installations which dominate the UK market, has allowed them to command a premium price.

Chart highlighting UK crystalline PV module market prices from the manufacturer. Courtesy: IMS Research

Rush to Purchase Modules Causes Spike in Distributor Pricing

Distributor pricing remained close to 25% higher than direct-manufacturer pricing in December as installers for small projects continued to favour purchasing in small quantities from local distributors and supply struggled to meet demand.

Although average prices from both distributors and manufacturers declined in December, a desperate rush to complete installations prior to the December 12th deadline, combined with a relatively short supply, saw some customers paying extremely high prices. Prices as high as £2.76/W were recorded for small orders from distributors and the range of prices (difference between highest and lowest prices) offered by distributors increased from £1.39 in November to an incredible £2.16 in December. In comparison, the range of prices offered directly by manufacturers remained fairly stable, as their longer lead times (due to modules not generally being located within the UK) meant that they were less able to provide modules in time to install before the FiT cut.

Chart highlighting overall UK crystalline PV module market prices. Courtesy: IMS Research

Prices To Continue Declining in January – Or Perhaps Not?

The pricing survey also asked respondents how they expected January’s prices to compare to December’s. As the majority of responses were received before the FiT cut was reversed, it is not surprising that the overwhelming majority were expecting prices to continue declining in January. Over 90% of survey respondents were expecting prices to decline in January, with almost 80% anticipating that prices would decline by over 5%. A weighted average of all responses suggests that average prices will decline by 5.5%, making average crystalline manufacturer prices around £0.82/W in January.

At the time of writing this article (January 3rd 2012), the industry is not only experiencing the same ‘first few days back after Christmas’ calm as many industries, but demand is currently stalled by confusion over what the high court’s ruling means for the industry - rather than the low tariff rates that people had previously expected would put the brakes on the market. As the month goes on, clarity will hopefully be restored and demand is likely to return, although some nerves from potential investors over future changes will prevent it reaching the levels that it did in November and early December. As end of year incentive reductions in other major European markets have pushed module prices in Europe lower still, prices in the UK are still predicted to decline this month. 

Chart highlighting overall predicted price increase/decrease in PV modules for January 2012. Courtesy: IMS Research

Profile photo of Sam Wilkinson, a senior market research analyst for IMS Research who specializes in the photovoltaics (PV) market. Courtesy: IMS ResearchJanuary and February will certainly be important months for the UK PV industry as it attempts to adjust once again to the ever changing business environment that relying on government subsidy schemes inevitably brings, and with volatile demand will almost certainly come volatile pricing!



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.