Union: Make the refinery safer, or we’ll walk

The United Steelworkers have threatened to strike at 69 oil refineries in the U.S. unless stricter safety procedures at plants and pipelines are adopted

10/03/2011


If oil companies don’t agree to stricter safety procedures at plants and pipelines, the union representing employees at 69 U.S. oil refineries said it will strike.

The United Steelworkers (USW), which failed during contract negotiations in 2009 to get companies to agree to have a union-trained safety specialist at each refinery, will make a similar demand during talks that begin in January for a new three-year pact, said Gary Beevers, a USW representative.

About 300 delegates to the union’s annual oil bargaining conference in Dallas approved a bargaining policy for contract talks with the companies.

“We were not in a position to strike the last time because the recession told us we couldn’t do that to the American public,” Beevers said. “We’re still not where we need to be economically, but the companies’ margins are better. We’re either going to get some changes in health and safety or we’re going to have a strike.”

Refinery and pipeline union members, which number about 30,000, haven’t struck since 1980, when a work stoppage lasted three months. A strike would affect almost two-thirds of U.S. refining capacity, according to union research.

During the last contract talks in 2009, the union accepted higher wages while relenting on new safety provisions. The three-year agreement included 3 percent annual raises and $2,500 bonuses.

The union pointed out incidents that safety training could have prevented. One was the chemical explosion at Tesoro Corp.’s Anacortes, WA, refinery on April 2, 2010, that killed seven people, the deadliest accident at a U.S. plant since 2005.

Five percent of U.S. refineries had significant incidents in the previous two years, Robert Hall, the U.S. Chemical Safety and Hazard Investigation Board’s lead Anacortes investigator, said on April 5, 2010.

“We always ask for better wages but we’re tired of taking chances with people’s lives,” Beevers said.

The policy, agreed upon unanimously by the delegates to the bargaining conference, went out this week to local unions representing workers at refineries and pipeline units. Ratification by 75 percent of the locals must occur within 45 days for the policy to become the official position for negotiating a new three-year contract with employers.

Most of the local contracts expire Jan. 31 and the rest later in the year. Talks should begin in January with Royal Dutch Shell, which will bargain on behalf of companies including Exxon Mobil Corp., ConocoPhillips and Valero Energy Corp. If approved, a deal between Shell and the USW will become the pattern used to negotiate local contracts.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.