Variable speed drive software reduces operation, maintenance costs

The Pump Genius software by WEG Electric is designed to reduce system operation and maintenance costs for the CFW-11 variable speed drives while increasing process accuracy.

08/18/2013


The Pump Genius software by WEG Electric is designed to reduce system operation and maintenance costs for the CFW-11 variable speed drives while increasing process accuracy. Courtesy: WEG ElectricWEG Electric's Pump Genius Software is designed for its CFW-11 variable speed drive. This process control software manages and monitors up to 6 pumps in a coordinated system. Pump Genius can operate motors from 5-150 hp in the 208 and 230/240 V ac range and motors from 5 up to 600 hp in the 480 V ac range.

The Pump Genius software is designed to reduce system operation and maintenance costs while increasing process accuracy and protection. The software provides control and protection as well as management of cycle hours and master and slave designation. It also monitors and controls system pressure or flow with available faults and alarms referencing low and high set points.

Pump Genius software monitors the operating hours of all the pumps in the system. It can add and subtract pumps as demand changes without the need for setting a cycle timer. This feature ensures equal pump run times without supervision. Another feature is the ability to have a floating master and slave rather than the traditional system of fixed master and slave pumps. Pump Genius automatically senses if the master is not responding due to sensor loss or other fault condition and assigns another pump to become the master, maintaining operational continuity at all times during the process. The transition between master drives is done in a totally bump less manner without disturbing the process.

The CFW-11 VSD with Pump Genius software also monitors and alarms system, motor and drive faults which will alert the operator to a potential problem. The drives are available in various sizes, from 2 to 600 hp.

In addition, all CFW-11’s have a built-in dc link reactors which help mitigate the harmonic output on the ac line. They also have intelligent thermal management features that provide automatic cooling to the internal components of the drive.

WEG Electric Motors Corp.

www.weg.net 

- See more Control Engineering asset management products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.