Vilification of coal

07/13/2010


Sunday morning I had a few minutes to look at the Chicago Tribune over the breakfast table. The headline on page 1 hit me: “Clean coal dream a costly nightmare.” I figured that they were talking about that FutureGen project that seems to be running by fits and starts, uses experimental technologies, and is ‘way over budget. But no, that’s not it. The article is about a far more conventional power plant being built in southern Illinois by Prairie State Energy.

The main complaint of the article is that this plant is going to be a financial drain on its customers and a huge polluter. You can hear the sound of the hands ringing.

Actually, the plant is pretty interesting if you know anything about generating technology. It’s a greenfield coal-fired plant with two units totaling 1,600 MW being built by Bechtel. (See a video about the construction.) It’s placed at the minehead, so there is no need to move coal by truck or rail. It comes from the mine directly to the plant by conveyor. This plant will have a four-stage pollution control system that uses proven techniques: selective catalytic reduction, dry ESP, wet limestone scrubber, and wet ESP. Acid-rain creating pollutants, mercury, and particulates will likely be cut by more than 95%. The only thing that will go out the stack will be carbon dioxide. Given its state-of-the-art technology and proximity to its fuel source, this plant will put out far less carbon dioxide per MW than many others in the eastern quarter of the country that are older and draw their coal all the way from Wyoming.

The Tribune spends much time discussing the point that construction is running over budget for various reasons. That may well be the case, and it wouldn’t be the first project where that has happened. It’s true that Prairie State’s customers will ultimately have to carry some of the overrun, but again, that sort of thing has happened before. It’s most important to consider these situations over the long term since this plant will probably still be running in 2050.

Between now and then, carbon could become an issue. If some sort of carbon taxing system goes into effect, coal-fired plants will have a disadvantage. But coal still accounts for almost 45% of U.S. electricity generation so nothing is going to change all that drastically any time soon. Prairie State will also have an advantage that this plant will be relatively cheap to operate in comparison to many other facilities.

A similarly-sized nuclear plant would be one possible alternative if you aren’t in a hurry (Startup in 2022?), or you could use wind turbines. Let’s see, creating 1,600 MW using wind turbines would require at least 500 turbines, and that assumes they’re running at full capacity all the time, which doesn’t happen. You can’t cover your base loading requirements with wind.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.