Vision sensor reads linear and data matrix codes

Balluff Sharpshooter ID vision sensor reads the most common codes on the market with high code module resolutions available.

05/24/2011


BallBalluff Sharpshooteruff’s line of Sharpshooter vision sensors includes an ID version designed to read a large range of linear bar codes and 2D Data Matrix codes, as well as optical character verification (OCV). By introducing the Sharpshooter ID version, Balluff now provides a range of low-cost, easy-to-configure vision sensor products.

The Sharpshooter ID vision sensor can read more than 10 types of linear bar codes, including PDF417 and 2D Data Matrix codes. The Data Matrix code reader is designed to read both printed and DPM (direct part mark) based marks. The ID version also has an OCV tool that can verify alphanumeric characters like date codes or expiration codes that can typically coexist with barcodes. The Sharpshooter ID incorporates Balluff’s new higher resolution algorithm, providing the highest accuracy for code reading at a standard vision resolution of 640 x 480 pixels. The ID code reader is also ECC 200 compliant and includes an Ethernet and Serial communication port as well as pass/fail I/O.

The Sharpshooter ID vision sensor uses Convis, the simple 3-step configuration software that is Windows based. Because the Convis software uses an Ethernet network connection, multiple vision sensors can be monitored and configured by a single PC. This same software version is used to configure the Standard and Advanced measurement versions of the Sharpshooter line to provide the greatest simplicity and convenience. Just like the measurement versions, the Sharpshooter ID version also has the storage capacity of 20 configurations/jobs, remote job switching via I/O, external lighting trigger and internal image storage.

www.balluff.com

Balluff

See machine vision application articles at www.controleng.com/machinevision.

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.