Where is this 10 GW of module inventory?

PV module inventory is higher than expected, leading to some concerns about a drop-off in prices, though IMS expects things to return to normal by the end of 2011.

07/11/2011


Back in May, we published a press release revealing that PV module inventory levels had reached a record of “over 10 GW” and predicting that prices would fall quickly as a result. Since then, we’ve been asked many times by worried suppliers to explain the figure, and tell them when we’d get back to ‘normal’ levels.

Firstly, I should point out that the majority of this inventory is ‘’channel inventory,’ which are the modules that are shipped by suppliers, but not yet installed, at a given time. These could be modules sent from China to warehouses in Europe, those sitting with wholesalers and distributors, or even those waiting for projects at installers. We carry out very detailed checks throughout the industry and supply chain to calculate this as part of our quarterly report on the industry. Of this 10 GW of inventory, we calculated that roughly 70% was channel inventory, and 30% was supplier-side inventory (i.e. in module suppliers’ warehouses).

Secondly, another important point to consider is that high inventory levels in themselves are not a problem. Any given industry, at any given time, will have a varying amount of product in the supply chain, and this is not a problem at all – as long as the product is moving. It only becomes a problem when something (e.g. Italian politicians and German feed-in tariffs) cause end-demand to slow suddenly.

Profile photo of Sam Wilkinson, a senior market research analyst for IMS Research who specializes in the photovoltaics (PV) market. Courtesy: IMS ResearchOne key question is, what is a healthy/normal amount of channel inventory? In some industries, such as the automotive industry, 6-12 months is not an uncommon amount of time between shipping major components and the final sale of the vehicle. In other industries, it would probably be a matter of weeks. Given how long it takes for a module to be manufactured, shipped, and then make its way through the supply chain before being installed; a normal time of inventory for PV modules is around 12-14 weeks. On this basis a ‘normal’ amount of inventory in June would have been around 5 GW – some 3 GW lower than reality.

With this in mind, and taking into account the numbers shown in the graph below, inventory levels were actually incredibly low throughout 2010 (with the industry running at around 8-10 inventory weeks) due to the high levels of demand throughout the year. This has been ‘over-corrected’ going in to 2011 due to the sudden change in demand, and will remain high throughout most of the year. However, we predict that inventory levels will return to ‘normal’ by the end of the year.

Chart outlining global PV module channel inventory from Q2 2010 to Q4 2011. Courtesy: IMS Research



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.