Wireless Control and Wireless Safety!

Safe wireless (also known as safe cableless) is often applied to a machine using a “zone” concept to reduce the wireless communication distance. As wireless machine communications increase, application questions include the following.

12/20/2010


J.B. Titus, machine safety bloggerWireless technology and applications have grown rapidly over the past few years, and safe wireless communication has become part of the discussion. This is particularly important when you look back thirty years or so when communication and control bus technology was driving most of us crazy. We’ve been through the “proprietary” bus stage when suppliers found this approach superior to the “open” bus approach most large end users wanted for their applications. The technology, however, developed quite rapidly and today the distances are greater, communication can be very fast, reliability has increased dramatically, and it’s even applicable for security and safety applications. When compared to wire or cable communication and control wireless technology can be more flexible, less costly to install, and can offer operational savings.

Recently, we’ve seen wireless machine safety applications emerge and the machine safety application standards are re-writing their requirements to address the applications using this technology. In most cases so far it appears that the safe wireless communication is the same as on certified safety bus systems as you hear suppliers promoting their systems. Let’s take a moment and look under the hood.

Safe wireless (also known as safe cableless) is quite often applied to a given machine using a “zone” concept, which dramatically reduces the wireless communication distance. In one of Control Engineering’s recent most read articles, “How to choose wireless technology for industrial applications,” you can read about the importance of distance in wireless applications. It’s my opinion that one reason suppliers use a concept called zone control is to optimize the reliability of communication by creating very short distances between antennas. Yet, at the same time several more (and growing) unrelated wireless devices may also be within the wireless communication zone. These other devices may just be communicating to the general machine control architecture and have nothing to do with machine safety applications. Examples of these machine mounted devices could be temperature sensors, vibration sensors, switches, and pressure sensors…….to mention a few.

A lot of folks in industry, and me included, are wondering how industry applications standards are going to address this multiplicity of simple to complex devices.  The complex devices are usually something like a cableless operator panel used for machine set-up, clearing of faults, etc. as in the blog Cableless (Wireless) Operator Panel Applications.

Has anyone come across this emerging issue and can you provide some advice how measures that can be applied to prevent unintended communication problems and possible hazards?     

  INTEGRATED SAFETY COULD BE YOUR OPPORTUNITY – CONSIDER IT!

 

As a side note – The 2011 updated NFPA 79, Electrical Standard for Industrial Machinery, was previously expected for release this month. The 2011 NFPA 79 schedule was recently modified and the current expected release date is June, 2011.  

Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Wireless Control and Wireless Safety!

Related articles:

How to choose wireless technology for industrial applications

Cableless (Wireless) Operator Panel Applications

Machine Safety – Cableless vs Wireless

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.