Wireless instrumentation helps boost production, cut costs at Argentine natural gas producer

Tecpetrol uses data from Rosemount wireless transmitters. Results in production increase of $4 million while reducing maintenance costs by 62% and supervisory control costs by 35%.

12/01/2010


Tecpetrol had to add instrumentation in congested areas, which saved wiring costs.Emerson Process Management’s Smart Wireless technology, is enabling Tecpetrol to boost production while reducing maintenance and operations costs at natural gas compression and delivery facilities in Argentina.

“With better information for improved measurement and control we have been able to produce an additional $4 million in natural gas, cut our maintenance costs by 62%, and reduce our supervisory control costs by 35%,” said Odin Fernández, Tecpetrol production manager.

Tecpetrol began using Smart Wireless, based on the IEC 62591 (WirelessHART) standard, in early 2009 to track gas venting, comply with environmental regulations, measure gas sold to third parties, and perform AGA3 calculations needed for economic balance of its facilities.

Initially, the company installed Emerson’s Rosemount wireless pressure, differential pressure, and temperature transmitters at wellheads in its Campo Duran field. Smart Wireless Gateways collect the real-time data and deliver it to the company’s DeltaV digital automation system. A Daniel ultrasonic flow meter installed for custody transfer measurements also allows Tecpetrol to cross-check the wireless data for quality control, while a ROC flow computer monitors remote points of the architecture.

After seeing the benefits of this initial installation, Tecpetrol added a similar wireless network to its Aguarague Field. Both installations enabled the company to enhance control and productivity. They now have access to data that was not available before, or that had to be checked manually by staff reading local gauges.

“Employee safety has been improved. We’ve cut our trips to the field by 15% and reduced human error,” Fernández added. “The operators can obtain diagnostics and check on plant processes remotely, which helps them better manage their time and work more efficiently.”

Installation costs for the Smart Wireless devices were also $120,000 less than for a wired solution. A wired network would have been very difficult to install because the areas monitored are densely packed with piping and rotating equipment.

“The Smart Wireless devices were easy to install and everything was up and running within a day,” Fernández said. “The network has been operating smoothly ever since.” The company is currently planning to expand its use of wireless technology to additional facilities.

www.emersonprocess.com

Visit Control Engineering’s Wireless Channel.

Edited by Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.