Wireless use increasing in building automation market

IMS Research's report on wireless use in the Americas and the EMEA market forecast that wireless sensors used in building automation sensors will increase to 25% by 2015.

01/19/2012


IMS Research LogoIMS Research’s latest report “The EMEA and Americas Markets for Building Automation Controllers, Software and Sensors – 2011 Edition” has found the air waves in buildings are increasingly being filled with signals from building automation systems.

In 2011, wireless sensors accounted for just over 15% of the 21 million building automation sensors shipped in the EMEA and the Americas markets combined. The number of wireless sensors is forecast to increase to over 25% of total building automation sensors in EMEA and the Americas by 2015.

William Rhodes, Market Analyst at IMS Research comments, “The increasing traction for wireless building automation solutions is likely to be apparent at the upcoming AHR Expo show. Some of the pre-show announcements, including from Ecologix, E+E Elektronik and Can2Go, have already hinted at the many new wireless sensors and wireless products being released in early 2012.”

Wireless solutions offer some of the greatest advantages in retrofit installations. Rather than drilling holes and running cables; electricians, integrators and contractors can install wireless sensors, saving on installation costs and time. In new build installations wireless building automation sensors are also popular in buildings with high ceilings because wireless sensors can be installed quicker than running cables for wired systems.

Rhodes continues, “There are obvious installation cost savings from wireless solutions. However, despite the cost savings in installation, the price of wireless devices is generally more expensive than wired equivalents. In terms of the continued growth of wireless building automation systems, the additional price of the devices could inhibit adoption when users do not take into consideration the installation costs. Consequently, IMS Research predicts that wired sensors will maintain the largest share of the market over the next five years.”

The IMS Research report on the EMEA and Americas markets for building automation controllers, software and sensors presents base year and forecast data for wireless sensors and controllers used in building automation systems. The report segments the building automation sensor market by five major sensor capabilities and 17 sensor types.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.