WLAN access points approved for use in explosive zones

Belden's Hirshmann WLAN Access Points and Clients are certified for use in potentially explosive environments such as those found in the oil, gas or mining industries.

05/16/2011


Belden has announced that its Hirschmann BAT54-Rail and BAT300-Rail WLAN Access Points and Clients have both ISA 12.12.01 Class 1 Div 2 and ATEX IEC/EN 60079 Zone II certification. This now means that when they are equipped with suitable protective cases, they can be used anywhere in the world – even in potentially explosive environments such as those found in the oil, gas or mining industries, according to Belden. Mountable on top-hat rails, these devices are also flexible enough for a wide range of situations, such as installation in control cabinets or distribution boxes. What's more, in combination with BAT WLC Controllers, they can be centrally configured and managed.

BAT300-Rail Access Points comply with protection class IP40 and support the IEEE802.11n (300 Mbit/s) wireless communications standard and MIMO technology, ensuring a stable wireless connection even in the event of problems such as reflections. The BAT54-Rail devices have up to two radio modules, operating at either 5 GHz or 2.4 GHz. An economically-priced version with a single WLAN interface is also available.

Both device series support all standardized encryption procedures in accordance with IEEE 802.1x. Integrated firewalls and IP routers enable network segments to be isolated and reliably safeguarded. It is also possible to connect both analog and DSL modems for purposes such as WAN routing or remote maintenance. Additional features include comprehensive management and QoS functions, fast roaming functionality, and a high level of resistance to shock and vibrations.

All access points and clients have a robust metal case measuring 3.15 in. x 3.94 in. x 5.31 in (80 mm x 100 mm x 135 mm). The temperature range extends from -22 ºF to +122 ºF (-30 °C to +50 °C). Maximum operational reliability is further ensured through quintuple power supply redundancy (2 x 24 V dc, 48 V dc PoE and 1 x 12 V dc).

By acquiring the two new certifications, Belden further extends the range of potential WLAN applications. "The BAT product portfolio now offers a maximum level of safety, performance and flexibility for all applications in potentially explosive environments. This applies to extensive networks that are managed by controllers, as well as local installations," says Sven Burkhard, Belden’s product manager for networking and connectivity products.

www.belden.com

Belden Inc.

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.