Your next home appliance: bio-gas generator

01/26/2010


Last Sunday, Joe gave me the results of some searching he’d done on the Internet about wood gas generators. (We discuss this topic frequently, and I keep telling him that I can’t believe he’s never dabbled in it given all his other interests.) Anyhow, apparently there’s a company in China that manufactures a commercially built wood gas generator with the catchy name JXQ-10A, designed to power a stove for heating and cooking.

I asked Kevin Chisholm of Wattpower what these appliances cost. He says, “We import them from China, for distribution throughout North America, and arrange shipping to the container unloading terminal nearest the customer’s location, in that they are shipped in ‘less than container load’ (LCL) lots. For simplicity, this can be called ‘the major freight terminal nearest you.’ The cost at this point is about $1,250, depending when the order is placed, the value of the U.S. dollar, etc. The customer looks after terminal charges, local taxes, his broker, and local delivery charges.”

From what I can tell, the unit has a cylindrical tank that’s about 48 in. tall and 18 in. diameter for the fuel. Next to it is a gas cooler and filter unit that is shorter and wider. It has a self-contained electric blower to suck air through the burner tank and pressurize it for delivery. You fill the tank with wood chips or whatever fuel is handy and light it from the bottom. Once the burning is stabilized, you can pull gas out of the chamber, cool it, and send it to the two-burner stove to cook dinner. Various reports say it is good for several hours of operation.

This makes a lot of sense. I can imagine that out in rural areas of China such a generator would be hugely practical. Compared to an old-fashioned wood-burning cook stove, this would be very sophisticated and probably much cheaper than trying to buy propane or butane. Users caution against trying to feed this gas into an engine. It carries much tar which accumulates in the cylinders and can ultimately glue everything together. Those that insist on using it with an engine say that with regular enough cleaning, the engine will continue to work. Flat-head engines (like the one on Joe’s sawmill) are preferred for this service since it’s easier to take the head off.

There are more sophisticated units built domestically that have additional filtration to remove tar so the gas can be fed directly to an engine without the ill effects. There are areas where wood, forest residue, and agricultural leftovers are abundant and effectively free. Moreover, using bio-scrap avoids the need to consume fossil fuels.

The downside is that wood gas has lots of carbon monoxide and tends to be a trifle carcinogenic. You really don’t want your gas generator indoors. Is this sort of thing for everybody? Maybe not, but short of having a neighborhood nuclear reactor or ethanol distillery in the basement, this offers one of the only practical approaches for using your own biofuels outside of having a fireplace in the living room.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.