Capacitive accelerometer and LCC/JCC chip

Silicon Designs, Inc.'s industrial-grade MEMS capacitive accelerometer chips modules and LCC/JCC chips range from ±2 to 400 g for zero-to-medium frequency instrumentation requirements.

07/17/2017


Silicon Designs MEMS capacitive accelerometer modules can be used as measurement points within active and semi-active suspension systems, where sensors are used to test the ability of a vehicle to absorb and dissipate negative energy for added safety. Cou

Silicon Designs, Inc.'s industrial-grade MEMS capacitive accelerometer chips include enhanced application suitability. The MEMS capacitive accelerometer modules and LCC/JCC chips range from ±2 to 400 g for zero-to-medium frequency instrumentation requirements. Module designs combine either a single axis model or three orthogonally block-mounted models within an epoxy seam-sealed anodized aluminum housing. The use of proprietary manufacturing technologies allows for onboard voltage regulation and an internal voltage reference, making the units relatively insensitive to temperature and voltage changes, while eliminating the need for external power amplification and regulation. Carefully regulated manufacturing processes ensure that each sensor is made to be virtually identical, allowing users to swap out modules with little or no modifications. MEMS capacitive accelerometer technologies provide the necessary stability and performance reliability for critical automotive test requirements, including road load data acquisition (RLDA), crash sled testing, vehicle and component durability testing, ride quality and handling, and NVH testing.

Silicon Designs

www.silicondesigns.com

- Edited by CFE Media. See more Control Engineering manufacturing IT, MES products.http://www.controleng.com/info-management/manufacturing-it-mes.html



No comments
click me