Closed current switch series have low fixed trip point

The CR9400 Series and CR9480 Series of Normally Closed Current Switches by CR Magnetics have a low fixed trip point and are fully isolated and self-powered.

07/17/2013


The CR9400 Series and CR9480 Series of Normally Closed Current Switches by CR Magnetics have a low fixed trip point and are fully isolated and self-powered. Courtesy: CR MagneticsCR Magnetics' CR9400 Series and CR9480 Series of Normally Closed Current Switches are designed for applications that require an on-off indication of current flow. The key features include a low fixed trip point as well as being fully isolated and self-powered. These feature allow for lower losses, improved lifetime durability, increased ruggedness and heat capacity.

The CR Magnetics CR9400 Series Current Switches are a closed design while the CR9480 Series are Split Core Current Switches. They are available with a NPN or PNP output transistor for DC switching and ACA output for switching AC. Continuous operating current above the rated full ON level of 350 mA is required.

CR Magnetics

www.crmagnetics.com 

- See more Control Engineering sensor products.



No comments