EC: Fluke 709H Precision Current Loop Calibrator with HART Communications

Hardware - Handheld test, measurement, calibration: The Fluke 709H is a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. This is a Control Engineering 2014 Engineers’ Choice finalist.

10/17/2013


Hardware - Handheld test, measurement, calibration: The Fluke 709H is a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. This is a Control Engineering 2014 Engineers’ Choice finalist.The Fluke 709H Precision Current Loop Calibrator with HART Communications is an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool.

The 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications.

The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in "two places at once."

The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.

www.fluke.com

www.fluke.com/fluke/usen/process-calibration-tools/loop-calibrators/Fluke-709H-Precision-Loop-Calibrator-with-HART.htm?PID=75865 Fluke Corp.



No comments