Flexible-boot cable assemblies help with cable routing

Molex's FlexiBend MPO/MTP flexible-boot cable assemblies are designed to optimize cable routing and feature flexible bend limiting boots that allow cable exits in varying positions from straight to a 90-degree angle.

03/31/2014


Molex's FlexiBend MPO/MTP flexible-boot cable assemblies are designed to optimize cable routing and feature flexible bend limiting boots that allow cable exits in varying positions from straight to a 90-degree angle. Courtesy: MolexMolex's FlexiBend MPO/MTP flexible-boot cable assemblies are designed to optimize cable routing and support low profile installations where cabinet doors or front panels might interfere with traditional straight style bend limiting boots. These optical cables can be used in datacom, telecommunications, medical, and industrial equipment cabinets and rack-to-rack applications. The assemblies feature flexible bend limiting boots that allow cable exits in varying positions from straight to a 90 degree angle.

Molex FlexiBend assemblies are designed with strain-relief boots that use a flexible and durable steel internal wire, which allows an installer to position the boot in place. The "stay-in-place" boot provides strain-relief, but can easily be repositioned without disconnection in order to modify routing requirements while the cable is in service.

Available in 12- and 24-fiber round cable options, FlexiBend is compatible with any MPO receptacle or active QSFP, CXP and CFP modules. Singlemode and multimode cables provide options for transmission link distances using OM3, OM4, OS1 and OS2 fibers. MPO/MTP FlexiBend boot cables have been mechanically tested to GR-1435, ISSUE 2 specification to ensure product performance over 25 bends in various positions.

Molex Incorporated

www.molex.com 

- Edited by CFE Media. See more Control Engineering energy and power products.



No comments