Linear motor system with configurable track and multiple movers
New XTS from Beckhoff combines multiple motion control technologies into a versatile transport system. Video: See the XTS in operation.
Video: Joe Martin explains XTS functions at Pack Expo.
At Pack Expo, Beckhoff Automation showed off its new XTS (eXtended Transport System) that combines linear drive technology with a track system that can be configured into virtually any desired shape. The result is a transporter system with a flexible path that can cover almost any desired length, is controlled wirelessly, and driven by a single PC. The linear movers have no wired connection and multiple units can function independently on the same track.
Movers can perform a variety of functions:
• Accelerate, brake, position, and synchronize themselves
• Take absolute positions on the track or relative to other movers
• Move as groups or individually
• Create clamping force while moving
• Recover energy through regenerative braking, and
• Position accuracy is better than ±0.025 mm @ 1.5 m/s with repeatability < 10 µm.
Tracks can be assembled using a variety of pre-configured modules in any desired combinations.
Beckhoff Automation
Edited by Peter Welander, pwelander@cfemedia.com
- Related News:
Compact embedded PC can serve as PLC, motion controller - 29.05.2013 09:58- Linear drives with manual pitch control - 11.01.2013 16:08
- Industrial panel UPS for manufacturing, water, wastewater, automation applications - 05.12.2012 17:43
- Capacitive proximity sensors, 12 mm, 30 mm - 26.11.2012 17:51