Advanced drive module for integrated control system

ACS Motion Control has enhanced the drive operation of its MC4U integrated modular control system with the development of an advanced 4 axis high-voltage universal digital drive module.

06/11/2009


 

Plymouth, MN— ACS Motion Control has enhanced the drive operation of its MC4U integrated modular control system with the development of an advanced 4 axis high-voltage universal digital drive module. Designated the DDM3U-4-320V, this high-density drive module is the newest component available for ACS' MC4U machine controller. The DDM3U is suited for demanding positioning applications including linear and rotary servomotors, step motors, and induction motors.
Compared to other network-based solutions that have expensive logic and control components at the drive level, the DDM3U amplifier is fully controlled by a dedicated servo processor at the controller level. This reduces cost and improves performance, allowing for more advanced control algorithms including multiple input-multiple output (MIMO) control.

 

Drive module for ACS

"The DDM3U enables advanced drive operation in an MC4U system to provide industry-leading performance while reducing space and costs," said Jason Georges, account manager at ACS Motion Control . "No other high-density, low cost product available today achieves the level of performance seen with this multi-axis PWM drive in an MC4U integrated machine control system."
Universal control algorithms and HW construction of these drives allow users to employ many different types of motors with the same HW, including DC brush motors, DC brushless/AC Servo motors (2 or 3 phase), stepper motors (open loop or sinusoidally commutated closed loop), and AC induction motors.
The card comes in a 2- or 4-axis version, with 1A continuous / 3A peak current rating or a 3A continuous / 9A peak current rating (per axis). The DDM3U provides up to 800W of continuous power (2400W peak) per axis and operates at 24-320Vdc. Customers are guaranteed power protection to the DDM3U with over and under voltage protection, phase-to-phase and grounded short-circuit protection, over-current and over-temperature protection, and control supply missing protection.
Contact ACS for pricing and lead time information .

 

– Edited by Renee Robbins , senior editor
Control Engineering News Desk

 

Motors and Drives channel

 


 

 

 



No comments