Data acquisition card with real time calculation

The isolated Genesis 1 kV data acquisition card by HBM can perform real time calculations on the fly and provides values per half cycle at sampling rates of up to 2 million samples/second.

01/13/2014



The isolated Genesis 1kV data acquisition card by HBM is able to perform real time calculations on the fly and provides values per half cycle at sampling rates of up to 2 million samples/second. Courtesy: HBM, Inc.HBM Inc. has added real time data calculation capabilities to its Genesis 1kV card. The isolated 1 kV data acquisition card lets the data recorders perform real time calculations on the fly, while allowing users to view results immediately.

The 1 kV card also provides values per half cycle at sampling rates of up to 2 million samples/second at voltages up to + 1000 V. Users can therefore see dynamic data such as currents and voltages produced when an electric motor is accelerated, for example. This capability helps engineers more easily meet design goals for optimization and efficiency. It is also useful in safety tests for the aviation industry as well as in the monitoring of generators and inverters, all applications that require millions of data points to be acquired, stored and visualized.

The system's sampling rate can be automatically switched following a trigger event in the real time calculation channels. Maximum sampling rates are therefore then only used for particularly critical measurement events. This results in smaller data files, so that testing becomes significantly more efficient.

HBM Inc.

www.hbm.com 

- See more Control Engineering I/O modules and data acquisition products.



No comments