Machine safety: Does effective grounding include ancillary hand rails, fences, and more?
How inclusive is effective grounding for machine safety? Should safe machine grounding consider hand rails, walkways, and protective fencing?
How all encompassing is effective grounding for machine safety? Does this requirement really include things like hand rails, walkways and protective fencing?
The discussion regarding effective grounding is really broad and sometimes vague in my opinion. Certainly it’s intended to protect people from being electrically shocked and to guard against any false or unintended operation or movement of a machine. Some standards will have pages of requirements whereas other standards might have one paragraph “referencing” a manufacturer’s specifications. Most of these standards benefit by some level of interpretation by a knowledgeable person for the most effective grounding applications. Let’s look at one general description/requirement from NFPA 79; 2012:
188.8.131.52 Equipment Grounding. The machine and all exposed, non-current-carrying conductive parts, material, and equipment likely to be energized shall be effectively grounded. Where electrical devices are mounted on metal mounting panels that are located within nonmetallic enclosures, the metal mounting panels shall be effectively grounded. Where specified by the manufacturer, components and subassemblies shall be bonded to the equipment grounding (protective bonding) circuit in accordance with the manufacturer’s instructions.
The first sentence of this standard can easily be interpreted as though provisions like hand rails, walkways, and protective fencing probably don’t need grounding or bonding provisions.
However, if the walkway or hand rail connects a machine to another machine which also has an electrical control system and devices, industry experts have often recommended that these metallic non-current-carrying conductive parts be effectively grounded.
Does anybody know why?
Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.
Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.