Potentiometer switch has dual control options
The SW44832 by Electro-Mech enables the user to specify a value with the SPST switch, allowing a circuit or channel to open automatically at the preset level.
Electro-Mech
Electro-Mech’s SW44832 potentiometer switch assembly offers both rotary and push-on functionality for maximum operation control. The compact all-in-one unit saves panel space in applications where there are tight design limitations.
The SPST switch enables the user to specify a value so that at the push of a button, the circuit or channel automatically opens at the preset level. Featuring an edgelit button (optional) and a momentary snap-click pushbutton switch, the SW44832 also features a 10K Ω resistance potentiometer module. Typical applications for the SW44832 switch include industrial/avionics displays and audio controls, instrument panel controls, and other high-density panels. Previous models were only available using EMC’s slide bar switch actuation design. The SW44832 also features front facing PC pins for easier interface to the PC Board in the next higher assembly.
The unit weighs less than one ounce and measures less than ¾ in” square. The SW44832 requires less than 1 in” of space behind the display panel and mounts directly to the PCB via front facing PC pins.
The SW44832 is rated at 0.10A resistive at 30 VDC. Potentiometer resistance is 10K Ω+10% but can be customer specified. Other features provided by the SW44832 include momentary snap-click switching, an operating pressure of 42 oz. (+ 7 oz.), plunger travel of approximately 0.040”, and a rated switch life of 250,000 minimum actuations.
Electro-Mech Components, Inc.
- Edited by Chris Vavra, Control Engineering, www.controleng.com
- Related News:
Multiple sensor integration course - 06.06.2011 20:28- AC powered electro-mechanical actuators offer UL listing - 29.03.2011 09:36
- Electro-mechanical actuators support Modbus TCP/IP protocol, enhancing communications - 20.03.2011 20:56