Signal conditioner series

Omega’s DRSP-I DC current signal splitter series feature features output test button for each channel and has the ability to interface a process signal with multiple panel meters, PLCs, recorders, data acquisition, DCS and SCADA systems.

10/17/2013


Omega’s DRSP-I DC current signal splitter series feature features output test button for each channel and has the ability to interface a process signal with multiple panel meters, PLCs, recorders, data acquisition, DCS and SCADA systems. Courtesy: Omega EOmega’s DRSP-I DC current signal splitter series feature one 4 to 20 mA input to two 4 to 20 mA outputs with full isolations. Each input has zero and span adjustments. The DRSP-I series also features output test button for each channel, built-in loop power supplies for sink/source I/O, split, convert, boost and rescale process signals and has the ability to interface a process signal with multiple panel meters, PLCs, recorders, data acquisition, DCS and SCADA systems. Typical applications include isolation, output splitting, output device separation and redundancy (i.e. to prevent failures of the entire loop if one device fails) or a combination of these. They are designed for chemical/petrochemical, water and environmental industries.

Omega Engineering

www.omega.com 

- See more Control Engineering process sensor and actuator products.



No comments