Podcast: Hardware and software to troubleshoot industrial Ethernet – Siemens Industry, Control Engineering

Marty Jansons, network consultant at Siemens Industry, discusses network troubleshooting with C.G. Masi, for Control Engineering, CFE Media, in a 12:30 minute podcast.

10/14/2010

Flash is required!

Various challenges result from of Ethernet in industrial environments, says Marty Jansons, network consultant at Siemens Industry in discussions about network troubleshooting with C.G. Masi, for Control Engineering, CFE Media. The 12:30 minute podcast covers switches, collisions, IP address planning and faults, and how hardware and software can help.

Also see the Control Engineering cover story on Troubleshooting Industrial Ethernet.

http://www.controleng.com/industry-news/top-stories/single-article/cover-story-troubleshooting-industrial-ethernet/26dcc33e6b.html



No comments