Motor control centers add Ethernet for remote monitoring
Medium-voltage Allen-Bradley Centerline motor control centers (MCCs) by Rockwell Automation have added EtherNet/IP to access information remotely. This allows personnel to safely monitor and diagnose potential problems without exposing the worker to potentially hazardous conditions.
Rockwell Automation has announced the addition of EtherNet/IP to its medium-voltage Allen-Bradley Centerline motor control centers (MCCs). With the features of an integrated EtherNet/IP network, manufacturers now have access to production information throughout the enterprise and can take advantage of simplified device programming with Premier Integration.
Leveraging a single, standard network simplifies communication for the entire enterprise and provides users with the flexibility to control, configure and collect data from any point in the system. In addition, by taking advantage of Premier Integration, users can configure and commission their MCC faster with Rockwell Software Studio 5000 engineering and design environment, helping to eliminate errors associated with redundant programming.
Furthermore, the Ethernet connection allows Centerline MCC users to access information remotely. This lets personnel safely monitor, troubleshoot and diagnose the MCC without exposing them to potentially dangerous conditions and power equipment. Knowing how an MCC is performing from anywhere also saves time by minimizing the need for maintenance personnel to enter the MCC. This involves suiting up with personal protective equipment to help protect personnel from exposure to hazardous conditions.
With embedded Allen-Bradley IntelliCenter technology, Centerline MCCs use a pre-configured and pretested network with integrated hardware and software. This level of integration helps reduce installation time with its plug-and-play setup, and can help minimize facility downtime by quickly providing intelligent diagnostic and predictive failure information.