CoaXPress used in Karbon-CXP frame grabbers

BitFlow Karbon-CXP frame grabbers are CoaXPress 1.0 compliant, support from one to four CXP cameras and up to four CXP multi-links, for machine vision use.

04/18/2011


BitFlow’s Karbon-CXP line of frame grabbers is one of the first to incorporate the CoaXPress (CXP) standard for moving high-speed serial data from a camera to a frame grabber. The result is video acquisition at speeds up to 6 Gigabits per second, as well as the ability to send control commands and triggers at 20 Megabits per second - all over a single piece of 75 Ohm coaxial cable up to 135 meters. Additionally up to 13W of power can be transmitted to camera along the cable.

"The CXP standard opens the door to applications where cable cost, routing requirements and long distances have prevented the move to high resolution, high speed digital cameras," explained Donal Waide, Director of Sales for BitFlow. "In many cases, existing coaxial infrastructure can be repurposed for CXP with very low installation costs."

According to Waide, CoaXPress solves many of the problems of previous machine vision standards. For one, it eliminates the cost and distance restrictions of Camera Link cables. In addition, it provides an increase in quality, resolution and speed over analog, while maintaining its simple and flexible cabling. GigE also uses low cost and long distance capable cabling, but introduces trigger latency and determinism issues that CXP does not have. In fact, CXP has been proven to perform 6x faster than GigE. The Karbon-CXP achieves these advantages on an industry proven platform.

BitFlow Karbon-CXP frame grabbers are CoaXPress 1.0 compliant, and support from one to four CXP cameras, as well as support up to four CXP multi-links (up to four links per camera). Other features include: supports CXP speeds from 1.250 to 6.250 Gb/S; provides power for all cameras (up to 13 Watts per camera); provides Safe Power, full protection from all power line faults; cameras are Plug and Play with automatic link speed detection; cameras can be accurately synchronized, or can be completely unsynchronized; PCI Express x8 interface (also works in x16 slots); separate I/O for each camera; highly deterministic, low latency frame grabber to camera trigger; and supports simultaneous serial communications to all cameras.

Like all BitFlow frame grabbers, adding the Karbon-CXP to an application is simplified by an included SDK that supports both 32-bit and 64-bit operating systems. Applications can be developed using C/ C++/.NET and BitFlow's sophisticated buffer management APIs. In addition, free drivers can be downloaded from the BitFlow web site for most 3rd party machine vision packages. The Karbon models are software compatible with each other, as well as with all the other current BitFlow frame grabbers.

Three Karbon-CXP models are available: single, dual and quad channel.

www.bitflow.com

BitFlow

Also see machine vision applications and tutorials at www.controleng.com/machinevision

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments