Density and concentration meter for harsh conditions, applications

Emerson Process Management's Micro Motion Fork Density meter helps users achieve fast-response density and concentration monitoring in challenging conditions.

03/20/2014


Emerson Process Management's Micro Motion Fork Density meter helps users achieve fast-response density and concentration monitoring in challenging conditions. Courtesy: Emerson Process ManagementEmerson Process Management's Micro Motion Fork Density Meter is built to tackle demanding process applications such as pipeline interface detection, mineral slurry solids monitoring, and corrosive acid concentration control.

The direct insertion Micro Motion Fork Density Meter is designed to solve problems like reducing product give-away, minimizing cross-contamination on multi-product pipelines, and ensuring operator safety when sampling hazardous liquids. It is designed for applications where fast-response density and concentration monitoring is required, even when the installation footprint is limited.

The Fork Density Meter incorporates a hazardous area head-mounted transmitter that has the flexibility to digitally connect to distributed control systems (DCS) as well as output raw sensor signals to signal converters and flow computers. With 4-20mA, HART, WirelessHART, Sensor Time Period, Foundation fieldbus and RS485 Modbus communications all supported, the system integration and start up/commissioning costs are significantly reduced.

With the implementation of HART and RS485 Modbus digital I/O communications, the Micro Motion Fork Density Meter has the capability to accept external signals from other field instrumentation such as temperature, pressure and volumetric flow devices. The input of these external measurements enables the Fork Density Meter to calculate and output enhanced process measurements such as mass flow and net solids flow, while still minimizing installation and cabling costs.

The Fork Density Meter also incorporates Known Density Verification, which checks the meter for measurement alarm conditions, sensor integrity and the presence of coating, erosion or corrosion. This technology expands the availability of diagnostics information in critical density measurement applications, resulting in reduced maintenance costs and cycle times.

Emerson Process Management

www.emersonprocess.com 

- Edited by CFE Media. See more Control Engineering sensor and actuator products.



No comments