Industrial safety light curtain protects fingers, hand, body
ifm Type 4 light curtains provide finger, hand, and body protection and continuously monitors itself for faults and monitors the surrounding area with an infra-red beam.
ifm's low-profile safety light curtains provide finger, hand and body protection in a variety of industrial applications. ifm Type 4 light curtains provide a multi-beam barrier of infrared light in front of a hazardous area. If any of the beams are blocked by an object, such as a finger or a hand, the light curtain sends a signal to the machine to place it in a safe state. ifm light curtains are offered in protective heights of 160 mm to 1510 mm in increments of 150 mm. The light curtain’s slim housing design measures only 28 x 30 mm that fits easily in an application for less intrusive mounting. Simple installation does not require software or control boxes and meets safety level requirements according to IEC61496; SIL 3, SILcl 3 and PL e.
ifm’s Type 4 light curtain continuously monitors itself for faults. A tight effective aperture angle of 2.5° reduces risk of optical short circuits, and the curtains include duplicate critical components and circuits in order to provide a back-up system should the primary system fail. Reset functionality and protected area width are configured without the use of DIP switches or complex software. Redundant safety rated solid-state outputs ensure fast response time. Bright LEDs indicate power, system status and fault conditions. Power is achieved with an M12 connection.
ifm efector inc.
See other Control Engineering sensor products