Power modules for outdoor and liquid cooled power systems
TDK Corporation's TDK-Lambda PFE1000FA series of AC-DC power modules enable designers to utilize a single device containing power factor correction, regulation, and input-output isolation.
TDK Corporation’s TDK-Lambda PFE1000FA series of ac-dc power modules enable designers to utilize a single device containing power factor correction, regulation, and input-output isolation. These modules have been widely used in outdoor and liquid cooled power systems for fanless applications in the industrial, signage, and communications markets. Operating from a universal input of 85-265 Vac, the PFE1000FA models are available with nominal outputs of 12, 28, and 48 Vdc and can be adjusted +/-20% via a trim-pin. All the power modules can deliver full power with an operating baseplate temperature range of -40 to 100 C. An isolated module good signal, remote on/off, 12V standby output, over voltage, over current and over temperature protection is included on all models.
TDK Corporation
www.tdk.com
– Edited by CFE Media. See more Control Engineering energy and power products.
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.