PVC cabinets with lift-off door for pole, pad mount

A line of non-metallic cabinets from Midwest Plastic Fabricators have been designed to support the unrestricted use of Automated Meter Reading technologies to provide protection for the metering and components while allowing their signals to pass through the enclosure without interference.

01/13/2011


A new line of all non-metallic cabinets from Midwest Plastic Fabricators reportedly supports the unrestricted use of Automated Meter Reading (AMR) technologies, providing protection for the metering and components while allowing their signals to pass through the enclosure with no interference. Manufactured from UV resistant high impact PVC, the cabinets are available in numerous large sizes for hanger mount or wall mount.

Lift-off doors are equipped with tamper resistant stainless steel hardware, and are padlock-able.

 

The use of these cabinets eliminates the need for external AMR meter antennae, maintaining the ability of the utility to choose their meter supplier, according to MPF.

 

Sub panel mounts are configured for existing panel choice, or the cabinets are equipped with panels to customer specification. For example, panels made from plywood, PVC, aluminum or painted steel are available from the factory.

 

The vents in the doors and cabinet body are screened to prevent pest and insect intrusion. Standard and custom dimensions are available factory equipped with hanger hardware. Weighing less than half the weight of similar sized painted steel cabinets, the non conductive PVC is inherently safe and corrosion resistant. Standard color choices include light grey, alabaster beige and sea foam green.

 

The door swing is available right to left or left to right. A drip shield, integrated into the top, overhangs the door.

 

For conversion of existing metal cabinet installations to AMR, the PVC door is available as a replacement for the door on the metal cabinet, eliminating the need for an antenna on the metal cabinet.

 

www.midwestplasticfabricators.com

 

Midwest Plastic Fabricators

 

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments