Servomotor line with field-replaceable encoders

Siemens' Generation II Simotics 1FK7 servomotors are field-replaceable 24-bit encoders in 10 styles as well as three inertia versions and seven shaft heights.

07/10/2013


Siemens' Generation II Simotics 1FK7 servomotors are field-replaceable 24-bit encoders in 10 styles as well as three inertia versions and seven shaft heights. Courtesy: SiemensSiemens' Generation II Simotics 1FK7 servomotors are configured to suit a wide variety of applications. The motors feature seven shaft heights, Quick-Connect power connector and high-accuracy 20- and 24-bit field replaceable encoders in 10 styles, all combined with a four-week lead time. 

The Generation II servomotor offers three inertia versions — standard, high-dynamic for rapid acceleration jobs, and high-inertia for smooth running. These motors are designed for operation without external cooling and the heat is dissipated through the motor surface. With 10 styles of field-replaceable encoders, the 1FK7 Generation II servomotors provide easy maintenance in the field, with reduced downtime and operating cost savings. Further, a 10% improvement in continuous (S-1) power is achieved since the encoders are mechanically and thermally decoupled from the motor. The mechanical decoupling also means the encoder is more resistant to vibration conditions on the machine. In addition, there is no need for battery back-up on the absolute encoders. 

Generation II Simotics 1FK7 servomotors provide users with 3x overload, 2.5 percent torque ripple, cross profiling for easier mounting, Siemens Drive-Cliq interface for easier field commissioning and unit recognition with the Siemens Sinamics S120 drive family, plain shaft or keyway design, three IP ratings and are supplied with or without holding brake.  

Siemens Industry Inc.

www.usa.siemens.com/simotics-s 

- See more Control Engineering motor and drive products.



No comments