12-MP CMOS camera captures clear images on fast-moving lines

CMOS-based machine vision camera from Toshiba Teli America Inc., CleverDragon CSC12M25BMP19, has a proprietary and patented 12-MP, 1.9-in. CMOS monochrome progressive scan sensor for high-speed machine vision, parts inspection, robotics, and medical applications.

12/11/2008


CMOS-based machine vision camera, CleverDragon CSC12M25BMP19 from Toshiba Teli America Inc.

CMOS-based machine vision camera, CleverDragon CSC12M25BMP19

CMOS-based machine vision camera from Toshiba Teli America Inc. features a proprietary and patented 12-MP, 1.9-in. CMOS monochrome progressive scan sensor. CleverDragon CSC12M25BMP19 is said to establish an optimal imaging platform to help OEMs and system integrators develop better high-speed machine vision, parts inspection, robotics, and medical applications. Camera’s CMOS sensor has 4096 (H) x 3072 (V) pixel resolution, 25-frames-per-second (fps) full-frame speed, and low signal-to-noise ratio that is close to a traditional CCD. Its development environment is enhanced by a Camera Link standard interface (10/8 bit), allowing for immediate integration into new and existing systems without the need for special cables or frame grabbers. Industrially rugged yet compact unit features an electronic global shutter to capture clear images of parts on even the fastest moving assembly lines. Its Window of Interest (WOI) function can be programmed to display a maximum of 28 square windows within a single image, then allow the user to select via a PC only those windows that are to be read out, significantly increasing fps rate. Other key features include large square pixels (6.0 x 6.0
www.toshiba-teli.com
Toshiba Teli America Inc.
– Edited by Jeanine Katzel , consulting editor
Control Engineering News Desk
Register here .

Machine vision online resource guide


Machine Vision Comes of Age

How should control engineers use machine vision?

On Track with Machine Vision for application examples

Machine Vision: Now is the Time (Product Research article, products)

Machine Vision Product Research May 2007 (Survey results in Resource Center; registration required)

Machine Vision: Not Just for Metrology Anymore (robotics applications)

Measure Up with Machine Vision (tricks and tips, references, setup hints)

Buyer’s guide search on machine vision

Automation Integrator Guide contains companies with machine vision expertise .
www.controleng.com/integrators

Latest Control Engineering products, news, articles on machine vision





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.