1.3 GW of PV installations eliminated by EU anti-dumping duties in 2013; double-digit global growth still likely

IHS reports that European PV installations are expected to fall 6 GW in 2013, but the overall growth is projected to be at a double-digit rate because of very strong demand from Asia.

09/10/2013


European photovoltaic (PV) installations are forecast to fall by more than 6 GW in 2013, with 1.3 GW of this decline attributed to incoming EU anti-dumping duties on Chinese modules according to a recently released analysis from IHS

Despite this dramatic fall, IHS still predicts global installations will grow at a double-digit rate to 35 GW in 2013 driven by a surge in demand in Asia. 

In its latest quarterly analysis on global PV installation demand, IHS cut has cut its forecast for the second half of 2013 in Europe by more than 1.3 GW, citing the anti-dumping tariffs that came into force on June 6. As a result of these duties, and several other factors, including changes to incentive systems, IHS predicts total European PV installations will fall to 11.6 GW in 2013, down 33% from 17.7 GW in 2012. 

”Although the E.U. Commission has given a small window of opportunity by reducing the tariff to 11.8% for 60 days, IHS still expects dampened demand,” said Ash Sharma, senior director of solar research at IHS. “This decline comes in stark contrast to the sharp increase in module shipments from China as buyers stockpile ahead of the next tariff increase in August, As a result IHS has cut its European forecast for the second half of 2013 by 1.3 GW—a nearly 20% reduction from our previous outlook.” 

The analysis found that the EU duties will accelerate the decline in European installations with biggest falls in Germany and Italy. 

“Germany will account for the majority of this decline with installations 3 GW lower in 2013 than the previous year,” Sharma added. “Italy will also contract by another 2 GW.” 

Double-digit growth still expected

Despite this huge fall in European demand, IHS still predicts that the global PV market will grow in 2013, with installations hitting 35 GW, up 11% from 31 GW in 2012. 

However, unlike most previous years, Asia will be the driving force for growth, with installations in the region predicted to exceed 15 GW for the first time and thus account for 45% of global demand. This will make the Asian market larger than Europe for the first time. 

IHS reports that European PV installations are expected to fall 6 gigawatts (GW) in 2013, but the overall growth is projected to be at a double-digit rate because of very strong demand from Asia. Courtesy: IHSChina and Japan will account for the majority of this and IHS predicts they will become the two largest markets in 2013 based on volume. Japan will lead in terms of revenue, as IHS previously announced

In addition, no European countries in 2013 will rank among the top three markets for the first time ever, and IHS’ PV Demand Tracker’s Top 10 ranking forecast for 2013 is now much more evenly balanced across all geographic regions. 

Emerging markets provide relief—but not in 2013

While the solar market is continuing to fragment geographically in terms of end demand, solar companies cannot fully rely on so-called emerging markets to provide support amid waning demand in Europe in 2013. 

IHS predicts that emerging markets will add 5.9 GW in 2013 up from 3.4 GW in 2012. However, this will be made up by more than 60 countries globally. 

“The good news, however, is that installations in these regions will grow to 9 GW in 2014 and to more than 16 GW in 2017 highlighting the need for solar companies to focus on emerging markets—but more importantly picking the right ones,” Sharma concluded. 

The IHS Global PV Demand Tracker is published quarterly and contains detailed analysis of PV installations in 60 countries.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.