2008 Honeywell User Group meeting overview

Jack Bolick, president of Honeywell Process Solutions (HPS), opened this year’s Honeywell User Group Meeting in Phoenix stressing the company’s mission of safety, reliability, and efficiency and how the company’s new products and services are focused on addressing these issues according to direct customer input.

07/01/2008


Jack Bolick, president of Honeywell Process Solutions (HPS), opened this year’s Honeywell User Group Meeting in Phoenix stressing the company’s mission of safety, reliability, and efficiency and how the company’s new products and services are focused on addressing these issues according to direct customer input.

Explaining how Honeywell takes customer input throughout the year and incorporates it into new product releases, Jason Bottjen from Valero, the Experion Customer Advisory Board Co-Chair, noted that HPS sponsors 14 advisory boards that host 350 customers from 24 countries. Bottjen added that the Customer Advisory Board (CAB) is introducing a new “virtual CAB” this year, with online surveys where customers can interactively provide input each month at www.letstalkprocesscontrol.com .

Following on Bolick’s opening comments regarding HPS’s mission, Jason Urso, vice president of technology for HPS, provided an overview of Honeywell’s new technology announcements, including:

  • R310 updates to Experion featuring Safety Manager integration to provide common Experion HMI access to both the plant safety system and controllers (regardless of the variety of field devices in place) as well as peer-to-peer communication between the C300 controller and Safety Manager over fault-tolerant Ethernet; the new release of Experion Batch Manager, which is capable of being run on the C300 controller (rather than on a server), resulting in 8-10% higher throughput, 80% reduction in phase transition, and 15-20% greater production levels; and consolidation of alarms using a new alarm configuration management tool, which permits operators to focus on high priority alarms while shelving lower level alarms to be addressed at a later time.

  • OneWireless R110—a multifunctional, scalable, and standards-compliant network that can interface with wireless instruments, cameras, and sensors to extend the control room to mobile operators and engineers. OneWireless is designed to be ready for the 110.11 release once it is finalized and comes with a HART gateway that allows any sensor on the network to appear to the operator as a HART device for ease of system management.

Urso also noted that Honeywell has no plans to set an “end of life date” for either the C200 controller or the TDC 3000.

“Honeywell looks at the DCS with a 30-year timeframe in mind,” Urso said, “supporting incremental migration to new technologies when the customer is ready, with no downtime and preservation of intellectual property in the system.”

www.hpsweb.honeywell.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.