2011 POY Finalists: Fluid Handling

Finalists in Fluid Handling in Plant Engineering’s 2011 Product of the Year competition

11/01/2011


 

Spray nozzles

Atomizing spray nozzles are internal mix nozzles that atomize fluids in a range of spray patterns for a variety of use. They combine liquid and compressed air to create a mist of atomized liquid that can be easily adjusted to meet the needs of any application. These nozzles allow you to coat, cool, treat, and paint a variety of products using compressed air and liquids with a viscosity of up to 300 cP. Used with water, atomizing nozzles are an efficient way to evenly cool hot items in automated processes.

EXAIR Corp.


Latching lid

The PIG Latching Lid for Poly Drums has been designed specifically to fit open-head poly drums. This lid opens and closes easily with one hand—no need to remove and reattach the drum ring, lid, or bolt to access drum contents. The lid also features a 3-in.-wide EVA gasket and locking mechanism that not only completely seals the lid to help keep drum contents dry and pure, but also helps prevent vapor emissions. Two sets of interchangeable drum spacers and extra wide-wide gasket design allow the lid to fit the five most common poly drum designs.

New Pig Corp.


TVA flowmeter

The Target Variable Area flowmeter for use on saturated steam is ideal for applications where there are large variations in flow rates. The integral electronics unit removes the need for a differential pressure transmitter, impulse lines, and additional equipment. A built-in temperature sensor provides full density compensation and enables power, energy, flow, total flow, pressure, and temperature to be displayed on the on-board LCD display. All flow parameters are fully configured on an integral keypad so no additional tools or configurations are required for setup and commissioning.

Spirax-Sarco Inc.


Hydraulic hoses

The MegaSys constant-pressure hydraulic hoses are easy to handle and can be routed in tight, confined spaces during installation. The spiral-wire hoses can be bent up to one-half and wire-braid hoses up to two-thirds the SAE specification, thereby saving overall hose assembly length and cost by as much as 64%. MegaSys hoses can handle biodegradable hydraulic fluids like polyester, polyglycol, and vegetable oil, as well as standard petroleum-based fluids. These hoses are found on machine tools, injection molding and die cast equipment, hydrostatic conveyor drives, and plant floor mobile equipment.

Gates Corp.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.