3 ways to improve energy efficiency in industrial applications

Schneider Electric offers three general ways to help industrial customers manage energy more efficiently and specific technologies and systems to help them do so.

09/27/2010


Schneider Electric offers three general ways to help industrial customers manage energy more efficiently:

1. Improve how applications are controlled. Adding intelligence to applications helps better match how and when they’re running while meeting the needs of associated processes;

2. Recover and reuse waste heat; and

3. Improve maintenance programs to ensure critical equipment is functioning efficiently.

Most common industrial applications to begin looking for energy savings are compressed air, furnace control, injection press control, and chillers.

Specific Schneider Electric solutions include:

-Pipeline management system that uses One SCADA for Process, Energy & Security at the control room - including interface with pipeline applications;

-Chiller compressor control optimization uses Twido and Altivar 61 technologies;

-Advanced furnace regulation for energy savings uses Modicon Quantum PLC, Sensors, and dedicated software;

- Injection press optimization through hydraulic clear mode solution use Altivar 61, pressure sensors, Zelio Logic; and

- EcoStruxure solution architecture is an approach which unites Schneider Electric’s expertise in power, datacenters, process and machines, building control, and physical security to enable intelligent energy management. EcoStruxure provides a new energy management architecture integrated and optimized for a maximum efficiency, and an intelligent integration that ties together five key domains of expertise thus reducing training, operating, maintenance and energy cost.

Also read: Schneider Electric PlantStruxure process management system optimizes energy use.

www.schneider-electric.com/sites/corporate/en/solutions/energy_efficiency/by-application/industrial-applications-control.page

www.schneider-electric.com/sites/corporate/en/solutions/ecostruxure/ecostruxure-videos.page

- Edited by Mark T. Hoske, Control Engineering, CFE Media, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.