50, 25, and 10 Years Ago

This page offers a look back on a variety of interesting items from Control Engineering's past issues, highlighting content from 50, 25, and 10 years ago. March 1955 Stop coining words! "Superfluous words only create confusion," says Mr. J.J. Brown, who helped develop the first record-controlled machine tool and works for Aluminum Fiduciaries Ltd.


This page offers a look back on a variety of interesting items from Control Engineering 's past issues, highlighting content from 50, 25, and 10 years ago.

March 1955

Stop coining words!

"Superfluous words only create confusion," says Mr. J.J. Brown, who helped develop the first record-controlled machine tool and works for Aluminum Fiduciaries Ltd.

"Rapid advance in any science is helped by good definitions. These definitions should be existing dictionary definitions, in order that today's writing on the subject may tie closely with the writings of the past," Brown claims.

"Yet, whenever a new subject appears, there is a tendency to coin words. This urge should be suppressed. The automatic production of goods and services is a complex subject, and ill-considered coinages like "automation" only add to the confusion.

"At a round table on the subject of automation," Brown says, "I tried to make the point that the dictionary already contains a series of words adequate to describe all known forms of automatic control of processes and machines. But I had little success in persuading the industry members of the round table that we had perfectly good words. Since most of the men writing about the new mechanized plants are from industry, the word "automation" is catching on. This is bad. It is already causing unnecessary confusion. Occasionally there is a need for new scientific words, but this isn't one of them."

September 1979

Single-chip analog and digital signal processor

In the past, attempts to combine analog and digital components on a single chip have been thwarted by differing semiconductor technologies. If a true hybrid device containing both analog and digital circuitry in a single chip were to be developed, a way had to be found that would be compatible with both concepts. Intel's solution is NMOS/LSI.

The new 2920 incorporates NMOS circuitry to perform the analog op amp, A/D conversion, and voltage reference functions with digital processing, all on a 28-pin chip.

2920 has been specifically designed to replace analog systems in real-time processing applications. It operates the analog circuitry simultaneously with the digital circuitry, thereby achieving the efficiency and speed needed for real-time processing. Advantages claimed for this approach include the elimination of several common analog system problems. Costly components linking precision resistors and capacitors will not be needed; circuit performance will not vary from one production run to another; performance degradation over time due to circuit integration or noise will be virtually eliminated—all because the digital signal processing is stable, predictable, and repeatable.

September 1994

Giants, machine control, and perspective

  • 40 years from now, giants will dominate —George J. Blickley, then consulting editor, predicted what the business of controls would be like in 40 years: "Most growth will come from two activities. One will be mergers & acquisitions that will help surviving companies fill out the line of total capabilities. The other is alliances. Sometimes the cash is not there, or the smaller company is not quite ready to be gobbled up, but the market opportunities and joint proficiencies are just right for striking an alliance."

  • Mechatronics, combined with 'intellectual' sensors, are seen to be shaping the future for machine control. Dr. J. Leonhard of the Technical University of Braunschweig, Germany, said, "It becomes obvious that engineering is advancing to a new quality of integration where mechanical, magnetic, electric, or thermal material properties are combined into an inseparable entity."

  • Autonomous, truly distributed controllers can now communicate with other controllers as needed via individual addressing on a simple twisted-pair line. The communication capability is provided by controller area network (CAN) chipsets already available from a number of semiconductor companies. Expect these autonomous controllers to share data interactively that will lead to shared objectives. New software in the immediate future will track effects between multidiscipline systems that share data or energy, updating all data as necessary for control and business management.

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me