A video game platform as your next process controller?

While some say current HMIs look like video games, is it practical to run a process unit using an obsolete Xbox as a controller? One supplier says it’s possible and even economical. Get your gaming thumbs back in shape.

04/01/2013


Get your gaming fingers back in shape. New system turns old Xbox into a DCS.That obsolete Xbox in the basement may have a new future as a DCS. While that may sound farfetched, one engineer has turned a 10-year-old game console into a process controller and is running a small batch chemical manufacturing unit using traditional gaming controllers. This project is another from industrial hacker Carl Landwiener who created a system several years ago that allowed field instruments to communicate wirelessly using old cellular phones.

“The original Xbox was essentially a Windows machine since it was produced by Microsoft,” Landwiener explains. “There’s really a lot of sophisticated processing power in there, so all it requires is a little reprogramming and a way to connect the I/O. They really aren’t all that hard to find as electronic junk, so they represent one of the great hardware bargains.”

Given that many people who are now in their 20s or 30s cut their video gaming teeth on just such a platform, picking up a traditional “controller S,” (see photo) will seem very familiar and maybe even a bit nostalgic. Landwiener’s first installation uses the first generation version of Halo as its main platform, although it’s difficult to see that in the graphics. The controller functions are much the same, so operators will find that changing valve positions will be much like defending against an enemy attack.

The original An interesting approach, to be sure, but even Landwiener admits it has its limitations. “At the moment, this system can only handle 48 tags, so it needs to be a pretty small process. There’s also a lot of manual code writing that has to happen to finish off the HMIs. It took me a while to get the control valves to stop looking like ‘grunts,’ but that’s pretty well under control now. There are some situations where shooting at a valve can open it when you really want it to close, so users really need to pay attention. That really adds some action that should keep operators engaged.”


<< First < Previous 1 2 Next > Last >>

kazuhiro , Non-US/Not Applicable, Japan, 04/02/13 10:06 PM:

good
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.