A video game platform as your next process controller?

While some say current HMIs look like video games, is it practical to run a process unit using an obsolete Xbox as a controller? One supplier says it’s possible and even economical. Get your gaming thumbs back in shape.

04/01/2013


Get your gaming fingers back in shape. New system turns old Xbox into a DCS.That obsolete Xbox in the basement may have a new future as a DCS. While that may sound farfetched, one engineer has turned a 10-year-old game console into a process controller and is running a small batch chemical manufacturing unit using traditional gaming controllers. This project is another from industrial hacker Carl Landwiener who created a system several years ago that allowed field instruments to communicate wirelessly using old cellular phones.

“The original Xbox was essentially a Windows machine since it was produced by Microsoft,” Landwiener explains. “There’s really a lot of sophisticated processing power in there, so all it requires is a little reprogramming and a way to connect the I/O. They really aren’t all that hard to find as electronic junk, so they represent one of the great hardware bargains.”

Given that many people who are now in their 20s or 30s cut their video gaming teeth on just such a platform, picking up a traditional “controller S,” (see photo) will seem very familiar and maybe even a bit nostalgic. Landwiener’s first installation uses the first generation version of Halo as its main platform, although it’s difficult to see that in the graphics. The controller functions are much the same, so operators will find that changing valve positions will be much like defending against an enemy attack.

The original An interesting approach, to be sure, but even Landwiener admits it has its limitations. “At the moment, this system can only handle 48 tags, so it needs to be a pretty small process. There’s also a lot of manual code writing that has to happen to finish off the HMIs. It took me a while to get the control valves to stop looking like ‘grunts,’ but that’s pretty well under control now. There are some situations where shooting at a valve can open it when you really want it to close, so users really need to pay attention. That really adds some action that should keep operators engaged.”


<< First < Previous 1 2 Next > Last >>

kazuhiro , Non-US/Not Applicable, Japan, 04/02/13 10:06 PM:

good
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.