Active surfaces control what's on them

Researchers develop treated surfaces that can actively control how fluids or particles move.


Figure 1: Photo shows a water droplet sitting on a ferrofluid-impregnated surface, which has cloaked the droplet with a very thin layer. Courtesy: Kripa Varanasi, Karim Khalil, Numan Abu-Dheir, Seyed Mahmoudi, MITResearchers at MIT and in Saudi Arabia have developed a new way of making surfaces that can actively control how fluids or particles move across them. The work might enable new kinds of biomedical or microfluidic devices, or solar panels that could automatically clean themselves of dust and grit.

"Most surfaces are passive," said Kripa Varanasi, an associate professor of mechanical engineering at MIT, and senior author of a paper describing the new system in the journal Applied Physics Letters. "They rely on gravity, or other forces, to move fluids or particles."

Varanasi's team decided to use external fields, such as magnetic fields, to make surfaces active, exerting precise control over the behavior of particles or droplets moving over them.

The system makes use of a microtextured surface, with bumps or ridges just a few micrometers across, that is then impregnated with a fluid that can be manipulated — for example, an oil infused with tiny magnetic particles, or ferrofluid, which can be pushed and pulled by applying a magnetic field to the surface. When droplets of water or tiny particles are placed on the surface, a thin coating of the fluid covers them, forming a magnetic cloak.

The thin magnetized cloak can then actually pull the droplet or particle along as the layer itself is drawn magnetically across the surface. Tiny ferromagnetic particles, approximately 10 nanometers in diameter, in the ferrofluid could allow precision control when it's needed — such as in a microfluidic device used to test biological or chemical samples by mixing them with a variety of reagents. Unlike the fixed channels of conventional microfluidics, such surfaces could have "virtual" channels that could be reconfigured at will.

Figure 2: Diagram shows the droplet on the ferrofluid impregnated surface. The oil-based solution keeps the droplet from being pinned to the surface and allows it to move freely. Courtesy: Kripa Varanasi, Karim Khalil, Numan Abu-Dheir, Seyed Mahmoudi, MITWhile other researchers have developed systems that use magnetism to move particles or fluids, these require the material being moved to be magnetic, and very strong magnetic fields to move them around. The new system, which produces a superslippery surface that lets fluids and particles slide around with virtually no friction, needs much less force to move these materials. "This allows us to attain high velocities with small applied forces," said MIT graduate student Karim Khalil, the paper's lead author.

The new approach, he said, could be useful for a range of applications: For example, solar panels and the mirrors used in solar-concentrating systems can quickly lose a significant percentage of their efficiency when dust, moisture, or other materials accumulate on their surfaces. But if coated with such an active surface material, a brief magnetic pulse could be used to sweep the material away.

"Fouling is a big problem on such mirrors," Varanasi said. "The data shows a loss of almost 1 percent of efficiency per week."

But at present, even in desert locations, the only way to counter this fouling is to hose the arrays down, a labor- and water-intensive method. The new approach, the researchers said, could lead to systems that make the cleaning process automatic and water-free.

Figure 3: When exposed to a magnetic field (magnet is seen at far right), the droplet is pulled toward the magnet by its thin cloak of ferrofluid, even though the droplet itself is not magnetic. Courtesy: Kripa Varanasi, Karim Khalil, Numan Abu-Dheir, Sey"In the desert environment, dust is present on a daily basis," said co-author Numan Abu-Dheir of the King Fahd University of Petroleum and Minerals (KFUPM) in Saudi Arabia. "The issue of dust basically makes the use of solar panels to be less efficient than in North America or Europe. We need a way to reduce the dust accumulation."

One advantage of the new active-surface system is its effectiveness on a wide range of surface contaminants: "You want to be able to propel dust or liquid, many materials on surfaces, whatever their properties," Varanasi said.

MIT postdoc Seyed Mahmoudi, a co-author of the paper, noted that electric fields cannot penetrate into conductive fluids, such as biological fluids, so conventional systems wouldn't be able to manipulate them. But with this system, he said, "Electrical conductivity is not important."

In addition, this approach gives a great deal of control over how material moves. "Active fields — such as electric, magnetic, and acoustic fields — have been used to manipulate materials," Khalil said. "But rarely have you seen the surface itself interact actively with the material on it," he said, which allows much greater precision.

While this initial demonstration used a magnetic fluid, the team said the same principle could be applied using other forces to manipulate the material, such as electric fields or differences in temperature.

The work was supported by the MIT-KFUPM Center for Clean Water and Clean Energy.

Massachusetts Institute of Technology (MIT) 

- Edited by CFE Media. See more Control Engineering CNC and motion control stories.

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me